XADO Anticarbon Cleaning the engine from carbon 320ml 10.82oz

Description

Cleaning piston rings from carbon
Fast-acting product designed to remove carbon contaminations and restore stuck piston rings of gasoline and diesel engines. Removes all scale and tar contaminations from parts surfaces of cylinder-piston group. It does not require oil change after application.
Restores mobility of stuck piston rings
Reduces oil consumption
Cleans cylinders and pistons, combustion chambers and valves from any kind of contamination (scale, carbon, varnish, tar)
Equalizers compression in cylinders
Decreases noise while engine operating
Removes deposits from spark-plugs
Reduces exhaust level into the atmosphere
Application instructions:
Warm up the engine. It should be warmed but not hot
Unscrew the spark plugs. Disconnect ignition timing sensor, Hall device and commutator
Spray the content (for 5 sec) into each cylinder alternately through a nozzle hose. Screw the plugs back in. Wait for 10-20 minutes. Unscrew the plugs. Cover the plug holes with absorbing fabric to avoid dirt flying-out and getting onto the paint. Rotate the engine with the starter for several seconds
Place the spark plugs into their position
Start the engine and run it at moderate rpm for up to 15 minutes. During this period softened remains of carbon will be removed through the exhaust system
Note:
Avoid getting the substance onto lacquer coatings!
Safe for catalyst converters, oxygen sensors, mechanical rubber parts and sealings.
Track Page Views With
Auctiva's FREE Counter